Corvette suspension and brakes - The ultimate! C5 Corvette aluminum suspension, custom power rack and pinion (rotates to clear mounts and headers), disc brakes, V8 motor mount... For 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

Transmission crossmember. Bolt on crossmember converts your stock manual trans frame to accept all GM automatic transmissions, except Powerglide. Very easy install. (unpainted... For 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

This is the steering rack for our bolt-in C5 Corvette front suspension conversion. Our steering rack was designed to keep correct suspension geometry and eliminate bump steer.... For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Cars and Trucks

This is a C5 Corvette suspension conversion. Fits 1939-48 Chevy Car and Sedan Delivery (except straight axle cars) This is a bolt on front crossmember that uses your C5 suspen... For 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

Don't have a donor C5 Corvette? We've put together all the components for a front C5 conversion in a kit. Complete with factory nuts/bolts to put it together. Does not include... For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

C5 Corvette Suspension Conversion Components For Chevy Cars For All Cars and Trucks

C5 Corvette Suspension Conversion Components For Chevy Cars For All

C5 Corvette Suspension Conversion Components For Chevy Cars For All Cars and Trucks

C5 Corvette Suspension Conversion Components For Chevy Cars For All Cars and Trucks

C5 Corvette Suspension Conversion Components For Chevy Cars For All Cars and Trucks

C5 Corvette Suspension Conversion Components For Chevy Cars For All Cars and Trucks

This is a V8 motor mount conversion to mount modern LS1, LS6 or Vortec (4.8L, 5.3L or 6.0L) into cars already setup for an early small block Chevy. The kit includes: mounts an... For All Cars

C5 Corvette Suspension Conversion Components For Chevy Cars For All Cars

This is a V8 motor mount conversion to use modern Chevy LS1, LS6 or Vortec engines (4.8L, 5.3L or 6.0L) into cars already setup for old style (side mount) small block Chevy. S... For All Cars

C5 Corvette Suspension Conversion Components For Chevy Cars For All Cars and Trucks

C5 Corvette Suspension Conversion Components For Chevy Cars For All Cars and Trucks

C5 Corvette Suspension Conversion Components For Chevy Cars For All Cars and Trucks

C5 Corvette Suspension Conversion Components For Chevy Cars For All Cars and Trucks

These are the lower shock mounts on the lower control arm for the C5 Corvette suspension conversion. For All Chevrolet Cars

C5 Corvette Suspension Conversion Components For Chevy Cars For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

C5 Corvette Suspension Conversion Components For Chevy Cars For All Chevrolet Cars

Suspension kit. Heidt's weld-in tubular A-arms without crossmember. Includes plain tubular upper and lower, full width A-arms. All packages include: 11" five lug rotors; ... For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Cars and Trucks

Suspension kit. Heidt's Mustang II weld-in, tubular A-arms with crossmember. Includes plain tubular upper and lower full width A-arms. All packages include: 11" five lug ... For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Cars and Trucks

Front IFS kit. Heidt's weld-in Superide II, 41-48 Ford Car. Contents of kits: Main crossmember T.I.G. welded for maximum strength and great looks. Exclusive one piece dropped ... For 1941 1942 1944 1945 1946 1947 1948 Ford Cars

This is a Heidt's weld-in IFS front suspension kit. It's a Superide II for 1940-48 Chevy car. Contents of kit: - TIG welded main crossmember for maximum strength and great loo... For 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

Mustang II Power Rack and Pinion 3/4 36 Spline Input Shaft for use with Heidts Mustang II kits when looking for a power upgrade. Kit includes the rack, hardware and tie rod en... For All

2" dropped spindle for Mustang II independent front suspensions. Easily lower the height of your car or truck while keeping the suspension geometry in place for a smooth ... For All Cars and Trucks

Spindle. Mustang II. Stock height. 1045 heat-treated alloy steel. Uses all stock rotors, bearings, calipers, etc. making it easy to install. Retains stock factory geometry. Al... For All Cars and Trucks

This is a Heidts brand front sway bar for Mustang Ii suspension kit in a 1940-48 Chevrolet car. For 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

Bracket kit. for use with heidts tubular full lower a-arms For All Cars and Trucks

This is a bolt-in crossmember kit that provides superior strength and 2-1/2" adjustability for Mustang II/ Pinto front end. Uses stock Pinto / Mustang II geometry so ther... For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

This is a standard weld in Mustang II crossmember that fits 1940-48 Chevy cars. It's pre fitted and ready to install. Everything is pre cut and unit retains Ford's stock geome... For 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

For 1940 1941 1942 1944 1945 1946 Chevrolet Trucks

Urethane Bushing Kit for Corvette Front Suspension. For All Chevrolet Cars and Trucks

Chevy Corvette front and rear suspension bushing kit that lets you upgrade worn and crumbling rubber bushings that dampen vibrations at mounting points for front upper and low... For All Chevrolet Cars and Trucks

Independent Front Suspension. For 84-87 C4 suspension assembly on 47-54 Chevy 1/2 Ton trucks. Professional installation is recommended for this kit. Uses C4 donor suspension c... For 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Trucks

Independent Front Suspension. For 88-96 C4 suspension assembly on 47-54 Chevy 1/2 Ton trucks. . Professional installation is recommended for this kit. Uses C4 donor suspension... For 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Trucks

Crossmember (Bolt On) - Ford For 1942 1944 1945 1946 1947 1948 Ford Cars

STANDARD. Fits '41-'48 Ford cars. Prefitted and ready to install. Everything is pre-cut and unit retains Ford's stock geometry. No cutting, just weld in place. Correct design ... For 1941 1942 1944 1945 1946 1947 1948 Ford Cars

Universal applications for vehicles with 56" or 60" track widths (frame rail dimensions measured outside to outside). For use w/ Mustang II frontends. Crossmember (H... For All Cars

Universal applications for vehicles with 56" or 60" track widths (frame rail dimensions measured outside to outside). For use w/ Mustang II frontends. Crossmember (H... For All Cars

Universal applications for vehicles with 56" or 60" track widths (frame rail dimensions measured outside to outside). For use w/ Mustang II frontends. Crossmember (H... For All Cars

Universal applications for vehicles with 56" or 60" track widths (frame rail dimensions measured outside to outside). For use w/ Mustang II frontends. Crossmember (H... For All Cars

1939-48 Chevy 2 1/2" dropped uprights for the original IFS, dropped steering arms CSA3948 required. Will accept original drum or aftermarket disc brakes. For 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevy Cars

1939-48 Chevy dropped steering arms for the original IFS required with the dropped uprights For 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevy Cars

1942-53 Buick 60 and 70 series 2 1/2" dropped upright for the original kingpin IFS, accepts stock drum or aftermarket disc brakes, requires steering arms to be heated and... For 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Buick

1939-47 Cadillac and LaSalle ALL series 2 1/2" dropped upright for the original kingpin IFS, aftermarket disc brakes required, requires steering arms to be heated and ben... For 1939 1940 1941 1942 1944 1945 1946 1947 Cadillac

1939-48 Pontiac all series, 2 1/2" dropped uprights for original IFS , accepts either stock drum brakes or aftermarket disc brakes, original steering arms must be heated ... For 1939 1940 1941 1942 1944 1945 1946 1947 1948 Pontiac

This 5/8 inch right hand straight angled adjuster with 1/2 inch sleeve is for GM cars only. Polished (Show finish) for suspension A-arms. For All Chevrolet Cars and Trucks

This 5/8 inch right hand multi angle adjuster with 1/2 inch sleeve is for GM cars only. Polished (Show finish) for suspension A-arms. For All Chevrolet Cars and Trucks

This is the nut, washer and lock pin for Mustang II / Pinto spindles (does 2 spindles). For All Cars

This front sway bar improve the handling of your top heavy Chevy. Use with Chassis Engineering IFS kit (pt # IF-7480EW). Includes bushings and mounts (for economy A-Arms). If ... For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

These are a non-adjustable built-in shock and bag. 2500lb 6-1/4" dia. Built to your specifications. Just provide us with the following information: Air shock length, open... For All Cars and Trucks

These are a 10 position adjustable built-in shock and bag. 2500lb. 6-1/4 inches diameter. Built to your specifications. Just give us the following information: Air shock lengt... For All Cars and Trucks

This is a 2600 pound airbag. It has 1/2 inch ports, 2 top holes for mounting that are 2-3/4 inches center-to-center and 1 bottom hole. Built specifically for automotive suspen... For All Cars and Trucks

DeNominator II 2500lb airbag, 600psi. 1/2" ports, 2 top holes (1-3/4" center-to-center) and 1 bottom hole. Built specifically for automotive suspensions rather than ... For All Cars and Trucks

The DeNominator II is a 2600 pound airbag, 500 psi. 1/2" ports, 2 top holes for mounting that are 2-3/4 inches center-to-center and 1 bottom hole. Built specifically for ... For All Cars and Trucks

Aluminum housing, oil/ gas compression damping adjustment and spring rate adjustment collar. For All Cars and Trucks

Aluminum housing, oil/ gas compression damping adjustment and spring rate adjustment collar. For All Cars and Trucks

Set cruise, park and ride height with 1 touch on 7" screen. Also a wireless Windows based on-board computer (Windows Operating System not included). Check email, bowse th... For All Cars and Trucks