Running Boards - Fiberglass, Smooth. 2" Wider Over Stock (1/2ton)

Item # 599578FW 39-40
Weighs 1.0000lbs.

These smooth Fiberglass running boards with built-in mounting points 1/2 ton pickup 2 inch wider than stock Top surface of running board is completely smooth. Widened at the rear to match our wide rear fenders, while still matching the stock front fenders. Corematt (a thin fabric that adds stiffness and strength) is layered between the fiberglass in the large, flat area on top of each board. YES, you can stand on them! Includes carriage bolt brackets affixed in the stock locations. * Hand-made with three layers of 1.5 oz fiberglass mat resulting in a part with consistent thickness and strength throughout * Hand-rolled to remove air bubbles that can compromise quality * No chopper gun used -- EVER! * Finished in glossy, black, sandable, gelcoat. Requires only minimal preparation before painting * Guaranteed to fit on stock, steel cars and many reproduction bodies. (Note: Vehicle condition and modifications may affect fit.) NOTE: This item ships direct from manufacturer. Additional shipping charges apply. Please call for rates

This part fits most 1939 1940 Chevrolet Trucks; exceptions may apply. Please read the complete description to see if this part fits your specific vehicle and application.

NOTE! This item is not available now, however we are accepting names to add to a list to be notified when we can get or produce this item.

This product can expose you to a chemical, which is known to the State of California to cause cancer or reproductive harm.

For more information go to www.P65Warnings.ca.gov

!='']

NOTE: Fiberglass products typically come with a smooth, gel coat finish (usually black) that requires prep prior to paint. Most fiberglass items do require some modification (usually minimal) to fit application. Most items DO NOT come with mounting holes pre-drilled. Keep this in mind when ordering fiberglass products.

Reviews

There are no reviews at this time

Fits Vehicle Models

Street Rod Parts - Product Fits Vehicle Models

Years	Make	Type	Model	Body	Description
1939	Chevrolet	Truck	VN	1.5	Utility - 1 1/2 Ton, Cab Over Engine, Dual Wheels - Wheelbase 156 5/8in.
1939	Chevrolet	Truck	VM	1.5	Utility - 1 1/2 Ton, Cab Over Engine, Single Wheels - Wheelbase 156 5/8in.
1939	Chevrolet	Truck	VH	1.5	Utility - 1 1/2 Ton, Cab Over Engine, Dual Wheels - Wheelbase 131 1/8in.
1939	Chevrolet	Truck	VG	1.5	Utility - 1 1/2 Ton, Cab Over Engine, Single Wheels - Wheelbase 131 1/8in.
1939	Chevrolet	Truck	VF	1.5	Utility - 1 1/2 Ton, Cab Over Engine, Dual Wheels - Wheelbase 107 5/8in.
1939	Chevrolet	Truck	VE	1.5	Utility - 1 1/2 Ton, Cab Over Engine, Single Wheels - Wheelbase 107 5/8in.
1939	Chevrolet	Truck	VD	1.5	Utility - 1 1/2 Ton, Dual Wheels - Wheelbase 158 1/2in.
1939	Chevrolet	Truck	VC	1.5	Utility - 1 1/2 Ton, Single Wheels, Wheelbase 158 1/2in.
1939	Chevrolet	Truck	VA	1.5	Utility - 1 1/2 Ton, Single Wheels - Wheelbase 133in.
1939	Chevrolet	Truck	VB	1.5	Utility - 1 1/2 Ton, Dual Wheels, Wheelbase 133in.
1939	Chevrolet	Truck	VA Panel	1.5	Utility -1 1/2 Ton-Panel - Wheelbase 133in.
1939	Chevrolet	Truck	JE Panel	1T	Commercial - 1 Ton-Panel - Wheelbase 123 3/4in.
1939	Chevrolet	Truck	JE	1T	Commercial -1 Ton - 14in. brakes - Wheelbase 123 3/4in.
1939	Chevrolet	Truck	JD Panel	3/4T	Commercial -3/4 Ton-Panel - Wheelbase 123 3/4in.
1939	Chevrolet	Truck	JD	3/4T	Commercial -3/4 Ton-3 Stake Pockets - Wheelbase 123 3/4in.
1939	Chevrolet	Truck	JC Panel	1/2T	Commercial -1/2 Ton-Panel - Wheelbase 113 1/2in.
1939	Chevrolet	Truck	JC	1/2T	Commercial - 1/2 Ton - 2 Stake Pockets - Wheelbase 113 1/2in.
1940	Chevrolet	Truck	WC	1.5	Utility - 1 1/2 Ton, School Bus Chassis - Dual Wheels - Wheelbase 193 5/8in.
1940	Chevrolet	Truck	WF	1.5	Utility - 1 1/2 Ton, Cab Over Engine - Wheelbase 156 5/8in.
1940	Chevrolet	Truck	WE	1.5	Utility - 1 1/2 Ton, Cab Over Engine - Wheelbase 131 1/8in.
1940	Chevrolet	Truck	WD	1.5	Utility - 1 1/2 Ton, Cab Over Engine - Wheelbase 107 5/8in.
1940	Chevrolet	Truck	WB	1.5	Utility -1 1/2 Ton, Single Or Dual Wheels - Wheelbase 158 1/2in.
1940	Chevrolet	Truck	WA Panel	1.5	Utility - 1 1/2 Ton-Panel, Single or Dual Wheels - Wheelbase 133in.
1940	Chevrolet	Truck	WA	1.5	Utility - 1 1/2 Ton, Single or Dual Wheels - Wheelbase 133in.
1940	Chevrolet	Truck	KF Panel	1T	Commercial - 1 Ton-Panel - Wheelbase 133in.
1940	Chevrolet	Truck	KF	1T	Commercial -1 Ton - Wheelbase 133in.
1940	Chevrolet	Truck	KE Panel	3/4T	Commercial - 3/4 Ton, 14in. Brakes - Panel - Wheelbase 123 3/4in.
1940	Chevrolet	Truck	KE	3/4T	Commercial - 3/4 Ton, 14in. Brakes - 3 Stake Pockets - Wheelbase 123 3/4in.
1940	Chevrolet	Truck	KD Panel	3/4T	Commercial - 3/4 Ton, 11in. Brakes - Panel - Wheelbase 123 3/4in.
1940	Chevrolet	Truck	KD	3/4T	Commercial - 3/4 Ton, 11in. Brakes, 3 Stake Pockets - Wheelbase 123 3/4in.
1940	Chevrolet	Truck	KC Suburban G	1/2T	Commercial -1/2 Ton, Suburban Carryall W/End Gate - Wheelbase 113 1/2in.
1940	Chevrolet	Truck	KC Suburban D	1/2T	Commercial -1/2 Ton, Suburban Carryall W/Doors - Wheelbase 113 1/2in.
1940	Chevrolet	Truck	KC Suburban	1/2T	Commercial -1/2 Ton, Suburban - Wheelbase 113 1/2in.
1940	Chevrolet	Truck	KC Panel	1/2T	Commercial - 1/2 Ton, Panel - Wheelbase 113 1/2in.
1940	Chevrolet	Truck	KC	1/2T	Commercial -1/2 Ton, 2 Stake Pockets - Wheelbase 113 1/2in.